•  WhatsApp Hulplijn +31 6 161 505 93 
  •   Veilig en eenvoudig betalen
  •  Grootste voorraad in Europa
  •  
  •   Vóór 15u besteld, vandaag verstuurd (ma - vr)

Data Sheet Micro Art AD 91

SECILTEK / SecilTek MICRO ART - beton ciré

112 weergaven
0 Vind-ik-leuks
0 0

Delen op sociale netwerken

Koppeling delen

Gebruik permanente koppeling om te delen via sociale media

Deel met een vriend

Alstublieft in te loggen voor het versturen van deze document per e-mail!

In uw website insluiten

Kies de startpagina

2. 2 TECHNICAL DATA SHEET MICRO ART AD 91 ACRYLIC SURFACE SEALANT 4. A P PLICA TION a) Substrate p reparation Substrate s should be dry, free of dust, release agents, loose or u nstable materials, efflorescence, as well as any type of material that affects normal adhesion conditions . b) A p plica tion Prior to application, the product should be stirred until it is completely homogenised . Apply over the substrate by using a short hair, a microfiber roll o r a conventional wax ap plica tor . Pour the product sparingly on the surface and spread it in circular move ments, overlapping the areas covered while they are fresh. Allow to dry completely for at least 3 hours and then apply the chosen surface protector . A fter drying , sand the surface so as to remove any irregulari ty . In this case, it is recommended to use a worn iron sandpaper so as to obt ain a smoother textur e . c) Re stri ctions The consumption of MICRO ART AD 9 1 should be respected as previously stated, so as to guarantee good performance . MICRO ART AD 9 1 should not be applied at room and substrate temperatures below 10 °C, above 30 °C and air relative humidity of more than 70 % . If temperature is below 10 °C and relative humidity > 70 %, curing is slower, increasing drying times . MICRO ART AD 9 1 should be protected from the action of humidity, condensation and water for at least 7 d ays (a t 20 ̊C) In indoor applications, rooms should be ventilated . In dry weather or in strong winds, facades should be protected to minimize the direct action of wind . Application of the product should not take place in case of rain or high humidity or if rain i s expected within 24 hours of application. These conditions may compromise the normal behaviour of MICRO ART AD 9 1 . d) Complementary Advices Do not add any other products to MICRO ART AD 9 1 . It should be applied as it is shown in its original packaging .

3. 3 TECHNICAL DATA SHEET MICRO ART AD 91 ACRYLIC SURFACE SEALANT 5 . PACKAGING AND VALIDITY Packaging B uckets of 1 and 5 litre s . Validity 12 months provided the conditions of the original packaging remain unaltered and in good storage conditions, protected from extreme temperature and humidity . 6. HEALTH AND SAFETY ( DOES NOT REPLACE CONSULTATION OF THE PRODUCT SAFETY DATA SHEET )  May cause sensitization in contact with skin ;  Avoid contact with skin and eyes ;  Use protective clothing and appropriate gloves ;  If it comes in contact with eyes, rinse immediately and thorou ghly with water and seek a specialist advice ;  Keep out of children’s reach ;  UE limit value for this product (Cat A/g): 30 g/l (2010). This product contains at most 15 g/l COV , as per directive 2004 /42/EC. Being the conditions of applying our products out of our reach we do not take responsibility for its misuse. It is the customer’s duty to verify the suitability of the product for the intended purpose. In any case, our responsibility is limited to the value of the goods sup plied by us. The information co ntained in the present data sheet may be altered without prior notice. In case of doubt and if you need any further advice pl ease contact our Technical Services . Revis ion of Jan uary 2019 FT. 0 5 0 0 8 .01 EN

1. 1 TECHNICAL DATA SHEET MICRO ART AD 91 ACRYLIC SURFACE SEALANT 1. DESCRI PTION MICRO ART AD 91 i s a surface sealant and waterproofing agent based on a new generation self - reticulating 100% acr y lic polymer - nanotec h nolog y . Its main characteristics are: excellent penetration ability, filling existing pores in the coating, good chemical resistance and also enhancer of coating colour . 2. FIELD OF USE MICRO ART AD 91 is used on vertical or horizontal surfaces indoors and outdoors and it is intended to fill pores of rigid surfaces of finishes , pro moting ad h e sion , finish lacquer ing and providing performance increase of acrylic surfaces prote ctor s such as v a rni sh es like MICRO ART AD 45 o r MICRO ART AD 46 . MICRO ART AD 91 is used as surface se a lant in the M ICRO ART system , prepar ing MICRO ART MC 01 o r MICRO ART MC 02 to receive su rface prote ctor s like MICRO ART AD 45 o r MICRO ART AD 46 o r waxes , such as MICRO ART AD 47 . It may be used for the same purpose for decorativ e floors of the SCALA range , as well as in architectural elements made with BETÃO - S ESTRUTURAL BRANCO and BETÃO - S E STRUTURAL CINZA . MICRO ART AD 91 is applicable on cementitious substrate s or stone elements both indoors and outdoors . 3. PRODUCT CHARACTERISTICS GENERAL CHARACTERISTICS VAL UE Aspe ct Colourless liquid, glossy finish Densi ty 1,03 ± 0,002 kg/m 3 Average theoretical consumption (1) 12 m 2 /l/ coat Drying time 3 h (2) Volatile Organic Compounds Directive 2004/42/CE DL No. 181/2006 EU limit value for this product (cat A/g):30 g/l 2010; The product contains at most 15 g/l (1) The values are theoretical and d o not include additional consumptions as a consequence of porosity of the substrate , surface profile, variation in levelling, etc. (2) These values require constant conditions of air humidity (max. 70%) and temperature (23ºC).

Weergaven

  • 112 Totale weergaven
  • 99 Websiteweergaven
  • 13 Ingesloten weergaven

Acties

  • 0 Social Shares
  • 0 Vind-ik-leuks
  • 0 Vind-ik-niet-leuks
  • 0 Opmerkingen

Aantal malen gedeeld

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+