• Ligne de support WhatsApp +31 6 161 505 93 
  •  Conseil professionnel
  •  Le plus grand stock d'europe
  •  
  •   Livraison rapide

FT.13004.01 EN ISOVIT E-CORK MD

2462 vues
0 Aime
0 0

Partager sur des réseaux sociaux

Partager le lien

Use permanent link to share in social media

Partager avec un ami

S'il vous plaît S'identifier envoyer ceci document par courriel!

Intégrer à votre site internet.

Sélectionnez une page pour commencer

1. TECHNICAL DATA SHEET ISOVIT E - CORK MD NHL ADHESION MORTAR WITH NATURAL CORK AG G REGA TES 1. DESCRI PTION ISOVIT E - CORK MD is a adh e sion mortar , formulated from mixed binders, cork aggregates and Natural Hydraulic Lime . 2. FIELD OF USE ISOVIT E - CORK MD is specially designed for fix ing of external cladding composed by high density expanded dark ag glomera te d cork panels – MD Facad e . For non - current uses or on particular substrate s, we advise you to contact our Technical - Commercial Services . 3. PRODUCT CHARACTERISTICS Powdered product Value Standard Co lou r Be i ge - Granulometr y < 1 ,0 mm - Paste product Val ue Standard Mixing water 32 ,0 % ± 1,0 % EN 1015 - 2 Theoretical consumption 5 ,0 kg/ m 2 – Double fix ing - Hardened Product Val ue Standard Compressive strength ≥ 6,0 MPa EN 1015 - 1 1 Flexural strength ≥ 2 ,5 MPa EN 1015 - 11 Adhesion to brick and block/ Mode of fracture ≥ 0,8 MPa/ A and B EN 1015 - 12 Adhesion to the insulation panel ( black cork agglomerate , ICB) ≥ 0,12 MPa Break in substrate - Density 10 00 ± 150 kg/m 3 EN 1015 - 10 Capil l ari ty Class W2 EN 1015 - 18 Permeability to vapour ≤ 10 μ EN 1015 - 19 Reaction to fire Class A1 EN 998 - 1 Thermal Conductivity (λ 10, dry ) 0,25 W/m. o C (P=50 %) NP EN 1745

2. TECHNICAL DATA SHEET ISOVIT E - CORK MD NHL ADHESION MORTAR WITH NATURAL CORK AG G REGA TES 4. A P PLICA TION a) Substrate preparation The substrate should be suf f icient ly flat and regular, cons isting of a mineral render , with composi tion and strength appropriate to the system substrate , for exa mpl e REDUR H2FIBRA or R EDUR MAX FORCE . The substrate should be cured when the panels are fix ed . The substrate should be co h es ive , ad h erent and free from dust or oils , and it should be dry by the time the system is applied . b) Mixture preparation ISOVIT E - CORK MD should be prepared by mixing 6,0 to 6,5 litres of clean water (preferably drinkable) per bag of product, using an electric mixer, until a homogeneous paste is obtained . c) A p plica tion The expanded agglomerate cork panels are fix ed to the substrate with the ISOVIT E - CORK MD adhesion mortar , by using the double fix ing met h od. This method consists of spreading the mortar onto the back of the panels and onto the substrate using a 10 mm notched trowel in order to ensure a continuous fix ing between the panel and the substrate . Pa n els should be placed in their final posi tion , press ed against the substrate , so as to squeeze the adhesion mortar . Simultane ously, their contours and surface planimetry should be adjusted with the adjacent panels , so as to avoid misalignment on the surface of the panels . d) Restri ctions ISOVIT E - CORK MD should not be applied at room and substrate temperatures below 5 ºC and above 30 ºC. Panel application should be carried out away from direct sunlight, strong wind and high temperature action . Facade panels have to be protected on top with finishing solutions that effectively protect the applied materials from the water inlet . e) Complementary Advices Do not use ISOVIT E - CORK MD for filling joints between the panels . The mixing water must be free of any impurities (clays, organic matter, etc.), and drinking water should be preferably used . No mortar that has initiated the setting process should be applied. Do not soften mortars by adding water after preparation . Do not add any other products to the mortar . ISOVIT E - CORK MD should be applied as it is shown in its original packaging . Do not apply under temperatures above 30 ºC or below 5 ºC. Do not apply on horizontal surfaces or with a tilt of less than 45º. Protect the top edges of the coating from rainwater .

3. TECHNICAL DATA SHEET ISOVIT E - CORK MD NHL ADHESION MORTAR WITH NATURAL CORK AG G REGA TES 5. PACKAGING AND VALIDITY Packaging 20 kg paper bags in plasticized pallets of 60 bags . Valid ity 12 months provided the conditions of the original packaging remain unaltered and in good storage conditions, protected from extreme temperature and humidity . 6. HEALTH AND SAFETY (DOES NOT REPLACE CONSULTATION OF THE PRODUCT SAFETY DATA SHEET )  Irritating to eyes, respiratory system and skin;  May cause sensitization in contact with skin ;  Do not breathe dust;  Avoid contact with skin and eyes;  If it comes in contact with eyes, rinse immediately and thoroughly with water and seek a specialist advice;  Use protective clothing and appropriate gloves;  Keep out of children’s reach . 1 5 ISOVIT E - CORK MD EN 998 - 1 Lightweight (LW) industrial mortar for fix ing of thermal insulation panels Declaration of performance DOP. 13 004 Being the conditions of applying our products out of our reach we do not take responsibility for its misuse. It is the customer’s duty to verify the suitability of the product for the intended purpose. In any case, our responsibility is limited to the value of the goods sup plied by us. The information contai ned in the present data sheet may be altered without prior notice. In case of doubt and if you need any further advice please contact our Technical Services . Revis ion of M ar ch 2019 FT 1 3 00 4 .01 EN

Vues

  • 2462 Total des vues
  • 2005 Vues du Site web
  • 457 Vues incluses

Actions

  • 0 Social Shares
  • 0 Aime
  • 0 N'aime pas
  • 0 Commentaires

Partagez le comptage

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Intégrations 4

  • 20 www.biomat.be
  • 19 www.biomat.nl
  • 1 www.google.es
  • 1 www.biomat.eu