• Ligne de support WhatsApp +31 6 161 505 93 
  •  Conseil professionnel
  •  Le plus grand stock d'europe
  •  
  •   Livraison rapide

FT.13001.01 EN ISOVIT FIBRA

1577 vues
0 Aime
0 0
ISOVIT FIBRA is a fibre reinforced adhesion and levelling mortar formulated from mixed binders, selected aggregates and additions.

Partager sur des réseaux sociaux

Partager le lien

Use permanent link to share in social media

Partager avec un ami

S'il vous plaît S'identifier envoyer ceci document par courriel!

Intégrer à votre site internet.

Sélectionnez une page pour commencer

4. 4 TECHNICAL DATA SHEET ISO VIT FIBRA ADHESION AND LEVELLING MORTAR FOR EXTERNAL THERMAL INSULATION SYSTEMS 10 ISOVIT FIBRA EN 998 - 1 General (G) purpose industrial mortar for bonding of thermal insulation panels . Declaration of performance DOP. 13001 Being the conditions of applying our products out of our reach we do not take responsibility for its misuse. It is the custom er’s duty to verify the suitability of the product for the intended purpose. In any case, our responsibility is limited to the value of the goods supplied by us. The information contained in the present data sheet may be altered without prior notice. In case of doubt and if you need any fur ther advice please contact our Te chnical Services . Revis ion of M ar ch 2019 FT 13 0 01 .01 EN

1. 1 TECHNICAL DATA SHEET ISO VIT FIBRA ADHESION AND LEVELLING MORTAR FOR EXTERNAL THERMAL INSULATION SYSTEMS 1. DESCRIPTION ISOVIT FIBRA is a fibre reinforced adhesion and levelling mortar formulated from mixed binders, selected aggregates and additions . 2. FIELD OF USE ISOVIT FIBRA is specially designed for fixing and levelling of EPS, XPS panels without film, mineral wool and expanded agglomerate d cork in thermal insulation systems on the exterior , on masonry substrate s, cement block, thermal insulation panels and/or hydraulic base substrate s, such as concrete and renders . ISOVIT FIBRA is suitable for the renovation of the thermal insulation of painted or ceramic coated facades, since it allows the bonding of external insulation systems directly on this type of substrate s with the addition of mechanical fixings – ISOVIT BUCHA . For non - current uses or on particular substrate s, we advise you to contact our Technical - Commercial Services . 3. PRODUCT CHARACTERISTICS C h aracter i stics Val ue Standard Co lou r Grey - Granulometr y < 0,6 mm - Paste product Val ue Standard Mixing water 2 4 ,0 % ± 1 ,0 % - Theoretical consumption 4 to 6 kg/m 2 - Bonding 1, 6 kg/m 2 /m m - Regulariza tion - Hardened Product Val ue Standard F lex ural strength ≥ 4,5 MPa EN 1015 - 11 Compressive strength ≥ 10 MPa EN 1015 - 11 Adhesion to brick / Mode of fracture ≥ 0,8 MPa / A and B EN 1015 - 12 Adhesion to the insulation panel (EPS; XPS; ICB) Break within the insulation Density 1300 ± 150 kg/m 3 EN 1015 - 6

2. 2 TECHNICAL DATA SHEET ISO VIT FIBRA ADHESION AND LEVELLING MORTAR FOR EXTERNAL THERMAL INSULATION SYSTEMS Capil l ari ty Class W2 EN 1015 - 18 Permeability to water vapour ≤ 15 μ EN 1015 - 19 Reaction to fire Class A1 EN 998 - 1 Thermal Conductivity 0,45 W/(m. o C) (P=50%) NP EN 1745 4. A P PLICA TION a) Substrate preparation Substrate s should be hardened, free from dust, release agents, loose or u nstable materials, efflorescence, as well as from any type of material which affects normal adhesion conditions . Substrate s should be levelled , checking with a two - meter ruler that there are no irregularities greater than 1 cm. Otherwise substrate s should be levelled with R EDUR MAX FORCE render . Pre - applied renders should have a "trowelled" texture and a cure of about 28 days, protected from bad weather. For applications on painted substrate s , there should be sufficient adhesion to withstand the new coating . If the substrate is an old ceramic coating, it must be sturdy and regularized and all pieces should have good adhesion to the substrate . If this is not the case, remove the loose parts and level the coating. If necessary, wash the substrate with suitable detergen ts in order to remove accumulated dirt and residues on the surface . b) Mixture preparation ISOVIT FIBRA should be prepared by mixing 5,5 to 6,5 litres of clean water (preferably drinkable) per bag of product, using an electric mixer, until a homogeneous paste is obtained . c) A p plica tion  Adhesion to masonry and uneven substrate s (unevenness greater than 1 cm per 2 metres ) Fix the panels laying a string of continuous mortar around the perimeter, adding at least three bonding points in the middle of it. Provide for mechanical fixing with ISOVIT BUCHA ( recommended minimum – 6 un/m²).  Adhesion on regular render or concrete surface s Simple continuous bonding should be carried out by using a 10 mm notched trowel, preferably laying the mortar on the back of the panels. Provide for mechanical fixing with ISOVIT BUCHA ( recommended minimum – 6 un/m²).  Fixing recommendations Fixing procedures should ensure surface uniformity, levelling and non - spacing of the panels, without joint openings and ensuring that there is no mortar left in between .  Levelling Apply ISOVIT FIBRA mortar onto the insulation panels, conveniently adherent to the substrate . Apply the first notched layer and, immediately, embed a glass fibre mesh with characteristics appropriate to the application – ISOVIT REDE 160/343 . The second layer should be applied over the firs t on e to give the surface the flatness necessary to receive the final finish .

3. 3 TECHNICAL DATA SHEET ISO VIT FIBRA ADHESION AND LEVELLING MORTAR FOR EXTERNAL THERMAL INSULATION SYSTEMS d) Restri ctions ISOVIT FIBRA should not be applied at room and substrate temperatures below 5 ºC and above 30 ºC. In case of strong winds, application may cause mortar cracking. In such case, walls should be protected so as to minimize the effects of wind action . e) Complementary Advices Do not use ISOVIT FIBRA for filling joints between insulation panels . No mortar that has exceeded it s open time should be applied. Do not soften mortars by adding water after preparation . Do not add any other products to the mortar . ISOVIT FIBRA should be applied as it is shown in its original packaging . The mixing water must be free of any impurities (clays, organic matter) and drinking water should be preferably used. Do not apply on horizontal surfaces or with a tilt of less than 45º. Protect the top edges of the coating from rainwater . 5. PACKAGING AND VALIDITY Packaging 25 kg paper bags in plasticized pallets of 6 0 bags . Valid ity 12 months provided the conditions of the original packaging remain unaltered and in good storage conditions, protected from extreme temperature and humidity . 6. HEALTH AND SAFETY (DOES NOT REPLACE CONSULTATION OF THE PRODUCT SAFETY DATA SHEET )  Irritating to eyes, respiratory system and skin;  May cause sensitization in contact with skin;  Do not breathe dust;  Avoid contact with skin and eyes;  If it comes in contact with eyes, rinse immediately and thoroughly with water and seek a specialist advice;  Use protective clothing and appropriate gloves;  Keep out of children’s reach .

Vues

  • 1577 Total des vues
  • 1244 Vues du Site web
  • 333 Vues incluses

Actions

  • 0 Social Shares
  • 0 Aime
  • 0 N'aime pas
  • 0 Commentaires

Partagez le comptage

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Intégrations 3

  • 15 www.biomat.be
  • 5 www.biomat.nl
  • 2 www.biomat.eu